4' x 12" SHARP Model RD-1230 RADIAL ARM DRILL PRESS new 2000

4' x 12" SHARP Model RD-1230 RADIAL ARM DRILL PRESS

New 2000

This is a high performance machine ideal for drilling, tapping , boring, reaming, lapping, screwing, counter boring, spot facing, and much more, on materials such as cast iron and steel.

EQUIPPED WITH:

Plain Box Table - Auto Reverse Tapping

Plain-Type Base - Power Arm Elevation

Manual Clamping to (Column, & Head)

Spindle Depth Setting w/Automatic Kickout

Coolant System (Built-In)

Features

• 12” column diameter
• MT#4 spindle, 5 HP motor
• 48” column to spindle center
• Drilling: 2.18” cast iron, 1.62” steel
• Boring: 4.75” cast iron, 3.37” steel
• Hardened and ground arm slide ways and gears
• Double tube column design to increase rigidity
• Arm elevation controlled by electric motor
• Manually operated arm, head, clamping
• Safety device prevents arm from dropping even when bronze nut is worn out
• Spindle depth setting with automatic kickout
• Auto reverse tapping function
• T-slots and drain channels on box table

Specs:

Diameter of column: 11.81 in.

Distance from column surface to spindle center, max.: 48.5 in.

Distance from column surface to spindle center, min.: 13.37 in.

Travel of spindle head: 35 in.

Distance from base surface to spindle end, max.: 54 in.

Distance from base surface to spindle end, min.: 19.37 in.

Elevating height of arm: 2.88 ft.

Effective area of table: 27.62 x 19.62 x 15.75 in.

Dimensions of base: 67.68 x 27.93 x 6.5 in.

Taper hole in spindle: MT #4

Stoke of spindle: 9.87 in.

R.P.M. of spindle (rpm range x steps): 44-150 x 12 steps

Feed of spindle (1PR x steps): 0.002-0.006 in. x 3 steps

Main motor (HP): 5 HP (2 speed motor)

Elevating motor (HP): 1 HP

Clamping motor for column and gear-box (HP): 1 HP

Clamping motor for arm (HP): 1 HP

Coolant pump (HP): 0.12 HP

Machine height from floor, max.: 9.12 ft

Measurement (LxWxH): 6.66 x 3.25 x 7.41 ft.

Approximate shipping weight: 4,950 lbs.

Cast Iron

Drilling: 2.18 in.

Capacity Tapping: 1.5 in.

Boring: 4.75 in.

STEEL

Drilling: 1.62 in.

Capacity Tapping: 1 in.

Boring: 3.37 in.

TOTAL POWER CONSUMPTION

220V: 8 KVA/25 amps

440V: 8 KVA/12.5 amps

STANDARD ACCESSORIES:

Box table

Coolant system

Work light