2012 Mori Seiki SL603B/4000 Slant Bed CNC Lathe w/Fanuc 32ib Control

Mori Seiki SL603B/4000 Slant Bed CNC Lathe 2012,
Cut Time 2,150 Hours,
Atling model AX5 s/n 12025 Hydraulic steady rest that has a range of 20-200mm
2-20″ Bison model #4317-20″-15A2 DIN-8″ HD 4 Jaw Chucks (Front and Rear) w/ 8″ thru hole
1-LMC hydraulic chuck, never used,
Specifications:
Capacity Swing over bed 970mm (38.2″)
Swing over cross slide 733mm (28.9″)
Between centers 4,300mm (169″)
Standard turning diameter 456mm (17.9″)
Max turning length 4,00mm (157.4″)
Travel
X-axis travel 485mm (19.1″)<450mm+35mm (17.7″+1.4) (travel in the minus direction from the spindle center)>
Z-axis travel 4,150mm (163.4″)
Spindle Max spindle speed 1,500 RPM
Number of spindle speed ranges 3
Type of spindle nose JIS A2-15
Through spindle hole diameter 185mm 7.3″
Spindle bearing inner diameter 2670mm 10.2″
Turret Number of tool stations 10
Shank height for square tool 32mm 1 1/4″
Spindle diameter for boring bar Max. 65mm 2.6″
Turret indexing time 0.4 Sec.
Tailstock Tailstock travel 4,100mm 161.4″
Tailstock spindle diameter 180mm 7.1″
Taper hole for tailstock MT6
Tailstock spindle travel 150mm 5.9″
Motor Spindle drive motor 37/30kw 50/40hp
Feed motor 6.0kw 8hp
Coolant pump motor 0.325kw .43hp
Chip flush coolant pump motor 0.325kw 0.43hp
Power sources Electrical supply 54.2kva
Compressed air supply 0.5
Tank capacity Coolant tank capacity 900L 237.6gal
Machine size Machine height 2,911mm 114.6″
Floor space 9,515mm x 3,665mm, 374.6″ x114.3″
Mass of machine 27,000 kg 60,060 lbs.